Blog

2026.11.10

Step Feeder Selection and Installation for Thai Factories

Step Feeder Selection and Installation for Thai Factories

You may want to introduce a step feeder, but cannot determine from catalog throughput alone whether your parts will be stably supplied. For such factories, this article summarizes the entire process—from evaluating part shapes, comparing feeder types, requesting quotations, to FAT/SAT—in a single workflow. The key point is to first decide whether your actual workpieces can be supplied in the required orientation, at the timing needed for downstream processes, rather than just relying on the machine’s nominal capacity. When comparing prices, do not compare by model name alone; instead, align the scope for hopper, step plate, alignment track, sensors, controls, safety, and on-site commissioning.

What Is a Step Feeder?

A step feeder is a supply device that lifts bulk parts placed in a hopper little by little using a reciprocating step plate, and delivers them to the next process from an upper exit. According to RNA’s product description, alternating lifting plates pick up parts from a fixed hopper, and preliminary orientation selection can be performed during transport. However, “lifting,” “aligning in a single row,” and “guaranteeing final orientation” are separate functions. The step plate alone does not always achieve the required orientation. Whether you need a straight alignment track, guides, cameras, ejection/return mechanisms at the exit depends on trials with your actual workpieces. RNA Product Information

A vibratory bowl feeder lifts and orients parts in a circular bowl. Step feeders can maintain a low loading height while ensuring sufficient exit height, and manufacturers highlight their low vibration and low noise features. IFSYS also emphasizes features such as stepwise metered feeding, gentle handling of parts, and low noise. However, you should not generalize that step feeders “do not cause scratches,” “do not generate dust,” or “can be used for any shape.” Results will vary depending on contact surfaces, drop height, oil/chips, and collisions between parts. IFSYS Product Information

Consider this equipment when you want to continuously supply molded or machined parts to an assembly machine, want to match the loading height to operators, have surrounding equipment sensitive to vibration, or when noise or part damage is an issue with existing vibratory feeders. However, success depends on the dimensions, weight, surface condition, and required orientation of the target parts. Rather than specifying the feeder type first, defining the parts and exit requirements first will reduce procurement failures.

Step Feeder Selection and Installation for Thai Factories - figure 1

Consider Feeding and Alignment as Two Separate Stages

Even if parts are lifted by the step plate, if they overlap, flip, or are misaligned at the exit, they cannot be used by downstream equipment. Therefore, divide the process into: “lifting bulk parts,” “single-row alignment,” “orientation judgment,” “ejection or return of non-conforming parts,” and “singulation for downstream.” The first two steps are closely related to the step feeder body. The remainder involves the design of alignment tracks, sensors, escapements, image processing, and other peripherals. If the quotation only lists the feeder body, confirm whether necessary exit functions are included.

For example, if you need to supply plastic caps with markings on only one side in a fixed orientation, the ratio of parts riding on the step plate and the final ratio with the marking facing up will differ. In prototyping, record both. Sensor judgment will vary depending on marking visibility, part transparency, oil film, and lighting conditions, so do not decide the selection method based on drawings alone. If it is not necessary for all parts to be in the correct orientation, designing a safe return and recirculation for misoriented parts is also an option. However, long recirculation increases scratches, contamination, and supply fluctuations, so also measure the number of returns.

First, Create a “Parts Feeding Specification”

The first thing needed for equipment selection is not the catalog, but the population of your workpieces. Collect samples not only of good mass-production parts, but also those at dimensional tolerance limits, with gate marks, burrs, surface treatment differences, oil adhesion, powder in packaging, and tangling after transport. Differences such as clean prototype samples versus powdery mass-production bins often cause problems on site. Before making these issues the responsibility of the equipment manufacturer, the purchaser should clearly define which workpieces are “acceptable” and which are “excluded.”

The specification should include part number, material, maximum/minimum dimensions, weight range, center of gravity deviation, surfaces where scratches are unacceptable, fitting orientation, limits for warping/burrs, and changes due to temperature or humidity. Also add conditions not easily shown on drawings, such as packaging style, batch loading quantity, loading frequency, operator access direction, cleaning fluids or oils used, and presence of powder or chips. If similar parts are to be run on the same equipment, list separately the guides/recipes to be changed and cleaning requirements for changeover.

Exit requirements should specify more than just “how many parts per minute.” Clearly state the definition of correct orientation, part spacing, tip direction, position variation, downstream receiving height, handoff signals, and allowable downtime in case of jams. Even if enough parts are visible at the step plate exit, if the singulation sensor is slow, effective supply capacity will drop. Do not compress the bottleneck of the entire transport line into a single number; observe at each boundary.

How Many Parts Are Needed for Testing?

It is not appropriate to declare a fixed required quantity. Short demos may miss powder accumulation after long runs, low hopper levels, immediately after product changeover, or jams after restart. The purchaser should create a test plan that includes not only normal lots but also unfavorable boundary conditions. Provide the same sample group, loading quantity, required orientation, and measurement window to all candidates for comparison. If unfavorable parts are manually removed during testing, record that operation and do not mix it with unmanned operation results.

RNA’s operating instructions indicate that the size and depth of the step plate should match part dimensions, small parts may jam in gaps, contamination may enter guide areas, and impact when dropping into the hopper should be minimized. This is for a specific model and should not be applied as a universal numerical limit to all models. During selection, obtain the current manual for candidate machines and confirm the applicable range for your workpieces. RNA STS Operating Instructions

How to Compare Step Feeders with Other Methods

At minimum, candidates should be divided into three types: step type, vibratory bowl type, and flexible feeding with camera and robot. Do not decide superiority by generalization; judge based on number of product types, orientation difficulty, contact with workpieces, allowable noise, floor space, changeover, and maintenance skills. The existing Vibratory Parts Feeder Selection Article covers bowl and flexible types. Here, we detail how to include the step plate type as a candidate. For the wider decision, see our four-method parts-feeding comparison. This article concentrates on the step feeder itself: lifting plates, hopper, exit orientation, and acceptance tests.

Comparison AxisStep TypeVibratory Bowl TypeVision-Based Flexible Feeder
Main MechanismLifts bulk parts with step plateTransports with bowl vibration and trackRecognizes bulk parts on tray with camera
Product ChangeoverMay require guide/alignment track exchange or adjustmentOften requires tooling matched to part shapeEasy with recipe/vision change, but requires grip design
Orientation GuaranteeDepends on exit-side selection/return mechanismDepends on selection mechanism on trackDepends on recognizable orientations and robot gripping feasibility
Weak Points to CheckGaps between plate and workpiece, level fluctuation, return circulationVibration/noise, part contact, shape dependencyCamera/lighting, robot cycle, overlap, cost

Asyril’s flexible feeding system spreads parts using three-axis vibration and is designed for communication with camera/robot systems. This is a comparison target for multi-product changeover, but since the cycle and equipment scope including the robot differ, comparing only feeder unit prices is meaningless. Asyril Product Information

If low noise is important, do not use the manufacturer’s general feature statements as guaranteed values for your factory. Measure with your actual parts, with both full and nearly empty hoppers, ambient noise, and at specified measurement points. For the same reason, “less scratching” should be checked by defining surface/photo criteria and comparing with your own defect rate standards. The decision axis should be your own acceptance data, not product advertising adjectives.

Define Capacity as “Number of Parts Received in Correct Orientation”

When estimating capacity, do not use the number of step plate lifts or parts supplied to the exit as the final capacity. Divide the actual number of correctly oriented parts received by the downstream machine by the available operating time. Report values both including downtime and for operating time only. Record separately the ejection/return of parts, overlaps, jams, supply shortages, sensor misjudgments, and downstream waiting to identify which equipment needs improvement.

For explanation, if downstream requires 60 parts per minute, correct orientation pass rate is 80%, and actual operating rate is 85%, then upstream rough supply needs to be about 60÷0.80÷0.85 ≈ 88 parts per minute. However, this formula is just a planning example multiplying independent losses, not a manufacturer’s guarantee or actual measured value. With low hopper levels or increased recirculation, the two rates may correlate. In testing, obtain operating rate and orientation pass rate in separate logs, and use the number of correctly oriented parts delivered as the acceptance value.

Distribution during continuous operation is more important than short-term averages. For example, even if the 5-minute average meets requirements, if a 30-second supply gap stops downstream, you will need a buffer or re-supply control. In the RFP, define “test period,” “minimum hopper level,” “product type,” “maximum continuous supply gap,” “handling of downstream waiting,” and “intervention required to clear jams.” If supply is excessive, parts may overlap and jam at the exit, so require control to maintain a constant number of available parts rather than chasing maximum capacity.

Step Feeder Selection and Installation for Thai Factories - figure 2

Hopper Capacity and Replenishment Flow

A low loading height is an advantage, but volume alone does not determine replenishment interval. Practical capacity changes with bulk density, tangling, ease of picking at low levels, and allowable loading weight. If operators bring boxes during the cycle, evaluate the position of the loading port, interference with safety covers, and whether two-person operation is needed. Include loading procedures in the design to avoid damaging parts by dropping large quantities from a high position or applying excessive shock to the plate mechanism.

Replenishment also affects equipment maintenance. If the design requires opening a door to add parts, clarify the number of openings during production and interlock operation. If using an external band hopper, a level sensor is needed to prevent overfeeding from the hopper to the step plate. If increasing upstream storage does not improve exit capacity, the real constraint is likely in the alignment track or downstream singulation.

Design Alignment Track, Detection, and PLC Integration as a Set

Treat the area from the step plate exit to the assembly machine as a single feeding cell. Set the exit guide width to minimize jamming, considering the maximum part size and burrs, and decide how to handle misoriented parts in orientation selection. Whether to eject or return them to the hopper affects the required chute, sensors, and cleaning frequency. Confirm with actual parts whether sensors for detecting passage direction can distinguish transparent, reflective, or black parts.

For PLC interface, at minimum, organize “operation permission,” “feeder running,” “part at exit,” “downstream ready,” “supply shortage,” “jam,” “safety stop,” and “manual reset request.” However, specific signal names and polarity should match equipment specifications. Clearly describe state transitions that can be tested, such as not keeping the exit full when downstream stops, not supplying two parts at restart, and stopping supply if a sensor fails. Before communication method, align the meaning of abnormal states.

Do not allow automatic restart after power recovery or emergency stop release without checking process and safety design. Separate cases where parts remain on the alignment track, after manual jam removal, or when downstream is still stopped. Safety circuits and normal operation requests serve different roles. Requirements and implementation of safety functions should be determined by overall equipment risk assessment, not just PLC program specifications.

Evaluate Safety and Maintainability at the Quotation Stage

The area between the step plate and fixed plate, exit singulation mechanism, drive parts, and loading port are locations to evaluate for contact, entrapment, ejection, and entanglement risks. ISO 12100 describes methods for hazard identification, risk assessment, and reduction throughout the machine lifecycle. OSHA’s machine guarding materials also explain guarding concepts to protect operators from pinch points and other hazards. For legal compliance in Thai factories, confirm with local requirements and do not declare compliance based solely on these overseas references. ISO 12100 / OSHA Machine Guarding

Jam clearing is especially frequent and often tempts operators to reach in during operation. Decide at the design stage whether jams can be safely removed through guards, require stop/isolation/release of residual energy, or need tools. RNA’s operating instructions state not to operate with protective covers removed, and cover power, grounding, cleaning, and maintenance. Check the candidate equipment manual for specific hazard points and align with on-site lockout procedures. Prioritize structures that make it difficult to reach hazardous areas, rather than relying solely on training documents.

For maintainability, check whether the plate gaps can be cleaned, time required to replace wear parts, spare part models, procurement lead time from overseas, and local technical support. If the alignment track position shifts every time it is cleaned, startup workload increases. Include positioning and inspection jigs in the quotation scope to allow restoration of reference positions after disassembly/reassembly. Specify cleaning procedures with photos and maintenance documents showing inspection frequency as deliverables.

RFP Items to Standardize Quotations for Thai Factories

In price comparison tables, do not list only the main unit price; write the responsibility boundaries in the same column. List design, workpiece testing, step plate/hopper, orientation selection, exit guide, sensors, control panel, wiring, guards, installation, FAT, transport, SAT, training, spare parts, warranty, and local modification support in a single row. Clearly indicate items each supplier lists as “excluded” to reduce causes for later price increases. The Special Purpose Machine Design and Procurement Guide also organizes cost boundaries that cannot be compared by equipment body alone.

In Thai factories, confirm in advance whether operation/fault displays and documents are readable by local maintenance staff, parts procurement routes, and utility conditions such as power and air. Whether a Thai-language operation screen is needed or English maintenance documents suffice depends on the users. Attach actual measurements and equipment specifications for power voltage/frequency, panel environment, installation space, and cleaning/dust conditions. Do not estimate standard conditions from country name alone.

Conditions Fixed in RFPInformation Provided by PurchaserSupplier’s Response
Workpiece RangeDrawings, acceptance/rejection limits, actual samplesTarget/excluded parts, prototype results
Exit QualityDefinition of correct orientation, position, spacingSelection method, handling of misfeeds
CapacityDownstream requirements, test window, handling of stopsEffective capacity of correctly oriented parts and measurement method
OperationReplenishment amount, product changeover, cleaning frequencyWork procedures and required time
ConnectionPLC signals, handoff height, downstream conditionsI/O list, state transitions, responsibility boundaries
Safety/MaintenanceRisk assessment assumptions, local maintenance conditionsGuards, stops, spare parts, documents

If a unit price cannot be quoted at the RFP stage, do not force a fixed price. Separate workpiece testing as a paid preliminary step and agree on “what to measure in prototyping,” “who bears costs if design changes are needed,” and “when to fix the mass-production equipment price.” A staged contract with clear verification conditions is often easier to manage than a fixed price without prototyping. However, the final decision on method depends on the target workpieces and procurement conditions.

How to Document Adoption Decisions in Pre-Implementation Pilots

The purpose of prototyping is not to select candidate machines based on whether they “worked or didn’t work,” but rather to clarify what needs to be changed to meet mass production requirements. First, determine the pass/fail evaluators from the client’s production engineering, quality, maintenance, and shop floor operations teams. Each department is looking for different outcomes: production engineering checks effective supply downstream, quality focuses on scratches and incorrect orientation, maintenance checks for jam clearance and part replacement, and the shop floor verifies supply routes and changeover procedures. If adoption is decided based on a demo for only one department, the burden often just shifts to downstream processes.

In the prototype plan, fix the lot, part number, and condition of the workpieces, and take photos before input. For surfaces where scratches are an issue, prepare reference samples for evaluation. If oil or powder is within acceptable limits, include not only ideal, cleaned samples but also those close to the upper limit of the acceptable range. Even if a shape appears symmetrical, fine grooves or markings may change the definition of orientation. Prepare photos of correct and incorrect orientations from all directions and count them using the same criteria as the supplier. If parts tangle with one another, also record the condition of the supply box when opened and how the parts are loaded into the feeder.

Decide the start and end points of measurement in advance. If you only extract the stable section after equipment startup, you may hide changes that occur as the hopper goes from full to low. Record events such as the hopper running empty, downstream stoppages, product changeovers, and jam clearances with timestamps. Videos are useful for root cause analysis, but do not rely solely on video to later reconstruct the number of items processed or reasons for stoppages. Also confirm whether the sensor count matches the count from the receiving tray or downstream equipment. If there is a discrepancy, distinguish between double counting, mixed ejected items, or missed detections by the sensor.

The adoption evaluation table should separate “mandatory requirements,” “adoptable with improvements,” and “reference values.” For example, safety guards and correct handoff to downstream are mandatory, cleaning time may be a condition with room for improvement, and maximum instantaneous capacity can be a reference value. However, what is considered mandatory should be determined by the risks and quality requirements of the process in question. Do not adopt a candidate that fails mandatory requirements based solely on an overall score. If adoption is conditional on improvements, specify who will make the design changes by when, and that a retest will be conducted with the same boundary workpieces.

When comparing candidates, use the same part number and lot, and use the number of correctly oriented items received downstream as the primary indicator. List noise, scratches, replenishment time, product changeover, cleaning, jam clearance, and ease of on-site maintenance as secondary indicators. The cost section should include not only the initial main unit, but also orientation sorting, control, safety, installation, spare parts, and operational scope. If the results are close, conduct trials with operators in the actual factory and check whether replacement parts can be locally sourced. By recording the reasons for adoption and any remaining uncertainties, you will retain a basis for judgment even if the design changes at FAT.

Especially when planning to use multiple part numbers interchangeably, inspect not only the pass/fail for each individual part, but also any residual items immediately after changeover. If the previous part number remains in the alignment path or return chute, it may mix into the start of the next part number. For parts with similar color or shape, do not rely solely on visual inspection for changeover assurance. Decide how to discharge, run empty, clean, and process confirmation items, and measure the actual time required for changeover. Even when using barcodes or part number verification to detect recipe selection errors, design the system to specify which mechanism will be stopped by the verification signal.

Additionally, always specify the applicable range for any numerical values obtained from prototypes. For example, the performance achieved with “target part number A, lot B, room temperature conditions, input quantity C, guide setting D, and downstream mock fixture” does not guarantee the same results with a different lot or actual equipment connection. Keep the raw data with details on measurement instrument calibration, counting methods, and treatment of downtime, and do not use only the summary tables in proposals as evidence. If the capability values presented by the supplier differ from your own tests, first compare the differences in conditions. In meetings to decide on equipment methods, present not only the achieved values but also untested conditions and the next risks to be checked on the same page.

What to Check in FAT and SAT

FAT is performed at the supplier’s site before shipment. Use actual workpieces, specified hopper levels, multiple lots, good and boundary parts, stop/restart, simulated jams, and product changeover, and verify with continuous logs. Acceptance criteria should include not only “average capacity,” but also correct orientation delivery rate, continuous supply gaps, part damage, recovery from abnormal stops, number of operator interventions, and safety device operation. If test conditions change midway, define the scope for retesting and do not use only short successful videos as acceptance evidence.

SAT is performed after on-site installation, using actual downstream machines, PLCs, operators, replenishment boxes, and power conditions. Even if FAT is successful, height, tilt, vibration transmission, air, power, and downstream interfaces may change after installation. In SAT, reconcile not only correct orientation supply by the equipment alone, but also the number received by downstream and reasons for stoppage. Also check restart, cleaning, and jam clearing by local shift and maintenance staff. Use the same measurement indicators for both FAT and SAT, and identify areas where environmental differences appear.

For example, for a line requiring 60 parts per minute, write the FAT/SAT judgment as “using specified multiple lots, measure the number of correctly oriented parts received in the defined test window, and separately record supply gaps and interventions.” Specific pass thresholds and test times should be agreed upon by purchaser and supplier based on allowable process downtime, part unit cost, and safety requirements. If you set a fixed universal value here, you may end up buying equipment that meets the number but stops in actual production.

Step Feeder Selection and Installation for Thai Factories - figure 3

Items to Record in FAT/SAT Logs

Record test date/time, part number and lot, part condition, hopper loading and remaining amount, equipment recipe, actual operating time, downstream waiting time, number of correctly oriented parts received, number of misoriented parts ejected, number of jams, number of manual interventions, reasons for stoppage, inspection method for scratches, and changed parts/settings. Since part movement changes with surface condition even for the same part, lot information is useful for later troubleshooting. A single-page pass/fail sheet makes it difficult to re-verify after improvements or compare between suppliers.

Estimate Cost and ROI for the Entire Equipment

Avoid showing a single market price for step feeders. Total cost varies with part orientation difficulty, dedicated tooling, exit inspection, guards, controls/wiring, on-site commissioning, transport, and spare parts. What should be compared is not the supplier’s main unit price, but the total equipment cost and maintenance cost up to “delivering one part in correct orientation to downstream” that meets acceptance criteria. Also consider the cost of exchangeable guides, modifications for additional product types, and downtime for maintenance.

For ROI, do not simply use the current number of manual operators as the reduction figure. Compare, in time sequence, the time operators spend placing parts, changing boxes, reworking misassemblies, machine downtime, and remaining monitoring/replenishment/cleaning. If you plan to reassign personnel to other processes, check whether that operation is actually feasible. When quantifying benefits, use only measured times and internally approved rates. Do not extrapolate ideal operating rates immediately after mass production startup to all annual shifts. Compare “initial cost,” “maintenance cost,” “product addition cost,” and “downtime loss” over the same period for each candidate method.

Decision Sequence When Improvement Proposals Arise in Prototyping

Even if the first prototype does not meet required capacity, do not immediately increase the step plate speed. First, separately record whether parts are bridging in the hopper, how many parts ride on one step, how many are returned at the exit, whether there is stagnation in the alignment track, and whether downstream is waiting for supply. If the cause of supply shortage is orientation selection at the exit, increasing plate speed may only increase returns. If the cause is replenishment interval, review loading amount and level detection settings before changing machine structure.

Manage improvement proposals in four columns: “changed part,” “expected effect,” “new risk,” and “conditions for retesting.” Changing the plate angle may make it easier for parts to ride, but may also lift two thin parts together. Narrowing the exit guide may improve orientation, but may cause jams with lots having burrs. Returning misoriented parts with air blow may increase throughput, but you need to evaluate part scattering and compressed air consumption. After changes, retest not only with favorable workpieces but also with the initially defined boundary samples and conditions.

Do not make prototype pass/fail a verbal promise such as “the supplier will adjust and make it work.” Leave behind step plate drawings, guide shapes, sensor positions, control settings, exchange parts, and adjustment standards needed to reproduce results on mass-production machines. If material or processing methods differ between prototype and mass-production parts, do not assume the same movement, and re-evaluate. The supply rate obtained in testing is the result for that workpiece, lot, and condition, and is not a number that automatically guarantees untested product types.

Also, confirm not only post-improvement capacity, but also whether local maintenance staff can maintain that state. If only skilled engineers can achieve the supply rate after long fine-tuning, it cannot be used as an expected value for daily operation. Ensure that actual staff can reproduce guide positioning after exchange, sensor checks after cleaning, and recipe recovery using manuals. Including this in SAT training confirmation reduces the operational gap between prototype success and stable mass production.

Common Design Failures and Countermeasures

The first failure is finalizing the method based on a short prototype with only one type of good part. Later, you discover similar part numbers, gate position differences, contamination, or low hopper levels, requiring rework of dedicated guides. The countermeasure is to select unfavorable workpieces from mass-production lots and attach test conditions to the contract. If part design can be changed, consider chamfers or symmetry for easier feeding, but do not sacrifice product function or quality.

The second failure is mistaking step plate throughput for line capacity. If orientation selection or singulation at the exit jams, the feeder may be running but nothing reaches downstream. The countermeasure is to place observation points at the hopper entrance, step plate exit, alignment track exit, and downstream receiving point. Use the actual count at the receiving point as the main indicator, and use differences at each observation point for improvement diagnosis.

The third failure is leaving jam clearing to the shop floor. If removing guards, clearing residual parts, and double feeding at restart are not included in safety design and controls, dangerous shortcuts will emerge after commissioning. Evaluate hazards and incorporate stop/isolation/recovery procedures into equipment specifications and training. Visibility of operation, tool access, and ease of cleaning are also aspects of design quality.

The fourth failure is unclear quotation responsibility. If the supplier is responsible up to the hopper exit and the downstream manufacturer from the receiving jig, no one guarantees the intermediate guides and signals. Illustrate the handoff surface, signals, and acceptance points in the RFP, and conduct overall testing with one company or agreed responsibility sharing.

Frequently Asked Questions

What is the typical price of a step feeder?

The price varies greatly depending on parts, required orientation, capacity, exit devices, safety covers, controls, and on-site commissioning, so a common market price cannot be presented at this stage. In quotations, have the feeder body, peripheral alignment, PLC connection, guards, FAT/SAT, and spare parts listed separately. A cheap main unit does not always mean a low total cost.

Which is better, a step feeder or a vibratory feeder?

Decide based on part surface, shape, number of product types, noise conditions, and exit orientation. Step type may be suitable for low loading ports and stepwise lifting. Vibratory type may excel in selection using dedicated tracks. For both, use actual workpieces and compare correct orientation delivery, scratches, stoppages, and changeover time under the same conditions.

Can a step feeder alone align part orientation?

The step plate may bias orientation to some extent, but guaranteeing required orientation is a separate issue. Depending on shape, exit guides, sensors, return mechanisms, or image processing may be needed. Define correct orientation with drawings and photos, and measure misorientation rate in prototyping.

How should we start introducing step feeders in Thai factories?

Summarize the range of mass-production workpieces, required orientation and speed for downstream, and local installation/replenishment/maintenance conditions, and provide the same RFP to all candidates. Next, prototype with actual parts and include FAT/SAT judgment in the contract. Also confirm that local maintenance staff can reproduce operation and cleaning.

Summary

The core of step feeder selection is not to decide the step plate model early. Create a feeding specification including workpiece variation, separate responsibility for lifting, orientation selection, singulation, and downstream receiving, and verify integration with actual parts through prototyping and FAT/SAT. Use advertised quietness and capacity as initial screening, but base adoption decisions on your own workpiece measurement results.

If you are considering automating parts feeding in a Thai factory, you can consult with us via Contact Us even if the target workpieces and downstream equipment conditions are not yet finalized. We can help you clarify on-site supply gaps, jams, and product changeover issues, and identify the conditions to verify in prototyping and acceptance.

References